Topic Rating
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to improve the operation efficiency of sand making machine
06-11-2018, 06:47 PM
Post: #1
How to improve the operation efficiency of sand making machine
Efficient centrifugal impact sand making machine has a wide range of applications. The working principle is that the material falls vertically into the high-speed rotating impeller from the upper part of the machine. Under the action of high-speed centrifugal force, it collides with the material around the impeller and then enters into the impeller and the casing. In the powerful vortex, they bumped and rubbed against each other until they were crushed. The material is discharged from the discharge port at the bottom of the sand making machine, and then the material is controlled by the screening equipment to achieve the finished product particle size that meets the requirements.
One of the biggest problems faced during the operation of the sand making machine is that the operation efficiency is low. How to improve the efficiency of the sand making machine has become the primary concern of SBM heavy industry. The operation efficiency of the sand making equipment is affected by many factors. SBM Heavy Industry Remind you to pay attention to the following aspects:
First of all, to understand the sand making machine in the entire sand production line process, the first is feeding, the second is the coarse broken jaw crusher, and the third is a high efficiency centrifugal impact sand making machine. The sand making machine is used as a rough breaking device for crushing hard materials such as ore, and has the characteristics of large crushing ratio, high output, uniform particle size, simple structure, convenient maintenance, and low production cost.
Secondly, the more mud or fine-grained grade in the feed of sand and gravel production lines, the greater the viscosity of the ore slurry, the smaller the settling velocity of the ore particles in the pulp, and the coarser the particle size of the overflow product; in this case, In order to ensure that the desired overflow fineness is achieved, additional water may be appropriately increased to reduce the slurry concentration.
The high-efficiency centrifugal impact sand-making machine has fine granular requirements for sand-making materials, and the requirements for its grain type and grain-size are very strict. The reason is that cuboidal sand has an interlocking effect because of its angular shape, and the continuous gradation of sand can greatly reduce the gap. At the same time, cubical sand occupies a larger surface area than round sand. Sticking asphalt and materials or cement and materials together reduces the possibility of displacement.
When the sand making machine breaks into the non-crushable stone in the crushing chamber, the rear thrust plate is used as a safety component of the sand making machine for maintaining the important parts of the equipment from being damaged.
The high-efficiency centrifugal impact sand making machine produced by SBM is a very simple and efficient sand making equipment. In the daily production, as long as many observations and researches, we understand the working principle of the high-efficiency centrifugal impact sand making machine and can give you Bring unexpected benefits.
Quote



Forum Jump:
Options +


User(s) browsing this thread: 1 Guest(s)

About Hack Bulletin

Hackbulletin.com is a friendly hack forums to learn and share knowledge. Whether you are a pro or just someone dabbling you can always learn more.

Don't be afraid to join and chat!

 

Links